Managed Gigabit Ethernet Fiber Media Converter 2- Port 10 / 100 /
1000Base-T to 1000 Base-X
10 / 100 / 1000M manageable fiber media converters offer a high
price/performance ratio, cover all functions of non-manageable
fiber media converter including variety of data rate, SM/MM, single
fiber and double fiber etc.
with simple set-up and complete function management interface, it
supports protocols like SNMP,WEB,TELNET and CONSOLE, and realizes
the integrated management to all chassis.
- Support 10Base-T, 100Base-T, 1000Base-T
- Supporting 2-Port Rj45
- Meet standards IEEE802.3z, IEEE802.3u, IEEE802.3x and IEEE802.3ah.
- With high performance auto-sensing exchanging chipset meeting
industrial standard, securing steady and non-traffic jam data
transmission and exchanging.
- Max.2046bytes packet at store-and-forward mode, Max. 9K bytes
packet at cut-through mode.
- AUTO-MDIX at electrical port, convenient for the user.
- low power consumption, low heat, standalone type with 10W special
communication power supply, chassis with dual redundant power
- hot swap media converter( in card type) and management card,single
fiber or double fiber(single fiber media converters should be used
in pair), standalone t type or 17 slots chassis are optional
Master-and-slave structure, Max. cascading chassis number is 4.
The failure of the management card won't influence the work of
Supporting remote and local management.
Supporting protocols like CONSOLE, WEB and SNMP.
Interface for management: RS232 Console Port (RJ45) and
10/100/1000Mbps RJ-45 Ethernet port.
Complete system information can be set up and displayed, including
the name of the chassis, terrain information, IP address and the
versions of the hardware and software.
Media converter card supports protocols like Q-in-Q Double Tag
VLAN, IEEE802.1q Tag VLAN and IEEE802.3x Flow control.
Detailed information regarding power supply can be tracked
including AC or DC, power and present working status.
Real time display of voltage and temperature on the cards of the
Each port at local or remote devices can be set up or tracked,
including the connecting status, connecting speed, half/full
duplex, port locked and LFP.
With rate limiting, any rate between 0Mbps and 1000M bps can be set
at the basic frame of 32Kbps, and any rate between 0Mbps and 1000M
bps can be set at the basic frame of 64Kbps.
Supporting Link Loopback test, precisely locating the failure,
convenient for link test.
Remote power off alarming, precisely distinguish remote failure.
With SNMP protocol, Trap Destination and Community Name and related
right can be set up, real time receive and display of alarming
information in way of SNMP Trap, special supervising window,
bumping alarming information.
Offering MIB files, convenient to be merged to the third party's
software like Open view and SNMPC.
Powerful historical alarming and operating log information tracking
and management function.
Flow statistic and pre-alarming function, real-time display of the
communication status at each port.
Support Equipment remote-restart, system or module restart by
With graded management mode (common user, super user and
administrator), and user identification function.
Reset to factory set up or dip switch status are optional.
Supporting online upgrading by FTP.
NMS supports network device auto-detect and auto-adding.
Real-time display of voltage and temperature on the chassis and the
operating status of he fans.
With centralized management and Top tree, several chassis can be
managed in the same interface at the same time; with grouping
management any converter can be conveniently manipulated among many
⑴ Meet standards: IEEE802.3z, IEEE802.3u, IEEE802.3x and
⑵ Data rate: 10Mbps, 100Mbps half/full duplex auto-sensing
⑶ Connector: RJ-45
⑷ UTP CAT5 or CAT5E connecting with RJ-45, transmission distance at
⑵ Connector: ST, SC, FC
⑶ Operating wavelength: 850nm, 1310nm at Multi-mode; 1310nm, 1550nm
at single mode.
⑷ Optical fibers: Multi-mode: 50/125,62.5/125,100/140um;
Basic working environment
Operating Temp: 0~50℃
Storage Temp: -10~70℃